Verify Piece Weight and Cavity Fill on Custom Silicone Gummy Molds
Stage method for piece weight and cavity fill on custom silicone gummy molds - edge vs center, air traps, and a weigh plan before volume.
How do you verify piece weight and cavity fill on custom silicone gummy molds before production? Run a staged weigh and fill check - edge vs center, air traps, agreed tolerance - then lock a golden sample. A Shorts clip is not proof your cavities deposit evenly. Product page: custom silicone gummy molds. Related: mirror-polish tooling, compression process.
Showcase is process context - not a piece-weight study for your mold.
Why weight and fill fail quietly
- Edge cavities underfill while center cavities run heavy.
- Air traps wash out logo detail.
- Soft walls flex during deposit and change effective volume.
- Lip flash changes fill height without an obvious defect callout.
Stage method
- Lock mold revision, cavity count, and Shore band to the PO.
- Deposit with the production-intent mix and method.
- Weigh edge and center pieces; log outliers.
- Inspect incomplete fill and trapped air in fine strokes.
- Photograph the golden sample with the revision ID in frame.
Sag under a full tray can move grams too: full-load sag check.
Timing
Typical planning estimates (shipping separate): reply typically within 12 hours; CAD / DFM 1-3 business days; prototype typically 3-5 business days after CAD approval; small batch typically 2-3 business days after sample approval; standard production typically 7-10 business days after approval. Large or complex jobs: timeline confirmed by project. Soft-mold MOQ is often 20 per design where that commercial floor applies.
/contact/ · info@wydsilicone.com
What to send
- Cavity CAD, target grams, and tolerance you can defend.
- Deposit method and the stickiest mix you will run.
- Edge vs center sampling plan.
- Prototype and production quantities.
Ready to order custom silicone molds?
Send your drawing, sample or project requirements for DFM and quotation.