Rose Cavities on a Translucent Silicone Tray
A rose tray fails when petals lock or the full sheet sags. The short holds a translucent cavity sheet to the light. Name wax, soap, or plaster first.
A rose tray looks finished when you hold it to the light. It fails when a petal undercut tears, or when the sheet folds once every cavity is full. The short below is a translucent multi-cavity rose mold flexed in hand on the WYD channel. Carton print in the background is not a second address and not a quote.
The sheet held up to the light
Use the clip to see repeated rose cavities in one flexible sheet, and how far the sheet bends empty. It is not a filled-tray test, not a petal-depth drawing, and not a count of cavities you can order from the frame. A still of this tray is already on the homepage lot row. This article is the short.
What fails on a rose cavity
- Petal edges that lock because the undercut was copied from a photo.
- A center that you cannot start the peel from.
- A sheet so large that a full pour sags before it sets.
- One Shore asked to press fondant, pour soap, and take wax.
The older note on one rose across crafts is rose molds across crafts. This clip is the tray in hand, not that comparison.
One primary pour
Name the first production pour. Wax belongs on candle molds. Soap belongs on soap molds. A plaster or resin flower is craft, not this food-tray assumption. We would not recommend quoting three materials off one empty flex. Send the rose file and the pour.
FAQ
How many roses are in the clip?
Enough to see a grid. Do not count cavities off a short and send that as the order. Send the count you want.
Is a translucent sheet food-contact?
Color does not decide that. Food-contact documents may be available for a selected material and market. This rose frame is not that document.
Can the same tray run wax and soap?
Only after you pick a primary pour. The other material is a second review.
Does the flex in the clip prove the filled tray?
No. Empty flex is easier than a full sheet. Tell us the filled weight.
What is the MOQ?
For applicable small-batch silicone mold programs, MOQ starts from 20 pcs per design.
Ready to order custom silicone molds?
Send your drawing, sample or project requirements for DFM and quotation.